BLOKACCES CONSTRUCTION TURNSTILE©
BLOKACCESS XL 300 P
ACCESS CONTROL PLATFORM WITH TURNSTILE
mobile-ergonomic-efficient
Securing construction sitesalso goes throughmobile and temporary access control solutions.
The solutions"BLOKACCESS XL 300 ©"provide effective, fast and ergonomic control of your access.
new on"CAP" systemreceive your turnstile and badgesrapidly by carrier,
Pdared,HASfed,VSonnected via its 3G modem, the system is operational immediately
For the dynamic control of your accesses, the rangeBLOKACCESS ©with its ultra-mobile full-height turnstiles.
Installed in minutes with its tilting ramps and adjustable platform.
The BLOKACCES XL 300 is connected in 3G/4Gand thus allows you to administer your badges instantly and from anywhere with its ergonomic interface.
3 arms: 1490 x 1310 x 2215 mm
BLOKACCESS XLT 300 D
Bi-directional double entry full height turnstile.
Drum 3 arms 120°for smooth passage in intensive mode.
Ultra-robust mechanicsand galvanized steel treatment and epoxy paint.
Integrated area lighting, indicator with integrated LED passage direction pictogram.
IP management center integrated with French software (VAUBAN/VISOR)
smartphone appincluded for simplified user management
4 badge readersincluded on reinforced steel plate
3 ways of passing:Controlled mode/Free mode/Prohibited mode with anti-panic and emergency function for quick evacuation.
IP65 protection, duration of 15 million cycles
High resistance automatic rising barrier with axial arm up to 6 m
The barrierBAR86is a barrier ofhigh strength safetyequipped with a smooth ofmaximum length of 6 m.
It guarantees continuous intensive service andanti-intrusion resistance. It secures sensitive collective sites and paid car parks requiring enhanced protection while allowing business continuity.
Composition of the BAR86 barrier
-
Shaft and door made of a 3mm thick DKP sheet treated by cataphoresis
-
Cover in 2mm aluminum sheet treated by phosphating
-
Axial reinforced aluminum boom up to 6 m
-
Opening / closing between 2.1 and 7.5 seconds
-
Three-phase motor and 230 V mono power supply
-
Inductive sensors
-
ONE-C control board
BAR86 automatic rising barrier with GA grid
BAR86 rising barrier with GA grid up to 7.5 m
• Secures access with a visual dissuasive aspect
• High impact resistance
• Low hinged grille constituting a physical obstacle for:
- Channeling pedestrians to access control: turnstiles, etc.
- Avoid the intrusion of animals on a protected site
Key Features BAR86 GA Grid
• Low articulated aluminum grid from 3 to 7.5 m
• 84 x 57 mm reinforced aluminum or fiberglass runners Up to Ø 140 mm
• Red and white reflective strips
• Intensive operation
• Guided articulation with removal against the rail
• Ø10, Ø14 and Ø20 mm bars
• Maximum length 7.5 m
• Paint / Finish Polyester powder baked at 250° -
• White and red lacquered
BAR86 automatic rising barrier with GTH grid
BAR86 rising barrier with high and low articulated GTH gate, any height up to 7 m
•Secures access with a visual dissuasive aspect
• Constitutes a physical obstacle for:
- Channel pedestrians to an access control:
turnstiles, …
- Avoid the intrusion of animals on a protected site
- HGV visibility
• Robust, reliable and aesthetic. Provides functions in extreme conditions of use (wind, snow, etc.)
Key Features BAR86 Grille GTH
• High and low hinged aluminum grille
• Aluminum boom from 3 to 7 m
• Intensive operation
• Guided articulation with erasure against the smooth of the 2
sides
• Bars 25 x 3 mm
• Paint / Finish Polyester powder baked at 250° -
• White and red lacquered
• Side rail with red reflective band
84 x 57 mm - LBA 6 and 7 (up to 4m)
135 x 93 mm - LBA 86 (up to 6.5m)
180 x 118 mm - LBA 12 (up to 7m)
• With extended upper grille on the shaft of the barrier
• 40 x 40 x 4 mm aluminum reinforcement tee. V from
reception and anti-sway on rest
• 25 x 3 mm aluminum plate
• Always installed with a rest
BAR86 automatic rising barrier with HP grid
BAR86 rising barrier with high protection HP gridup to 6m
• Secures access with a visual dissuasive aspect
• Ideal substitute for a gate
• High impact resistance
• High and low grid constituting a physical obstacle for:
- Channeling pedestrians to access control: turnstiles, etc.
- Avoid the intrusion of animals on a protected site
- HGV visibility
Main features BAR86 HP Grille
• High protection aluminum grille
• Rectangular aluminum boom 175 x 75 mm, from 2 to 6 m
• Intensive operation
• Equipped with defensive serration
• Ø20 mm rungs
• Paint / Finish Polyester powder baked at 250° -
• White and red lacquered
• Upper rigid grille in standard RAL aluminum
9010; frame 30 x 20 mm and bars Ø 20 mm
• Lower hinged grille in standard RAL 9010 aluminium;
bars Ø 20 mm red (RAL 3020) and white (RAL 9010)
• Rectangular aluminum side profile
175 x 75 mm thickness 2 mm
• With reflective strips
Automatic rising safety barrier BLOKBAR50
BLOKBAR50 automatic safety barrier
Resistance certified by real crash test, classification obtained: 3.5 T at 48 km/h
• Automatic barrier arm height 90cm and length up to 6 m
• Reinforced oval aluminum arm with axial fixing of 135x93mm
• 2 supports with reinforced steel strut
• Low sealing depth
• One-C control card with screen, for easy commissioning and parameter setting
• Continuous operation
• Three-phase geared motor, 230v mono power supply
• Compression compensation spring
• Anti-condensation heater
• Rail support by reinforced axial stirrup
Automatic rising safety barrier BLOKBAR80
BLOKBAR80 automatic safety barrier
The automatic security barrierBLOKBAR80is designed to ensure thesecurity of sites with a very high level of securityexpected, such asnuclear sitesor classified sitesSEVESO.
Thanks to its shallow sealing, it allows installation on sites where the basements are cluttered with networks.
Resistance certified by real crash test, classification obtained: 7.5T at 80 km/h
• Automatic barrier arm height 90cm and length up to 6 m
• Reinforced oval aluminum arm with axial fixing of 135x93mm
• 2 supports with reinforced steel strut
• Low sealing depth
• One-C control card with screen, for easy commissioning and parameter setting
• Continuous operation
• Three-phase geared motor, 230v mono power supply
• Compression compensation spring
• Anti-condensation heater
• Rail support by reinforced axial stirrup
LIFTING BARRIER LOW 5M
Barrier DOWN 5
The BAS 4-6 M rising barrier efficiently ensures access control and the flow of incoming and outgoing vehicles.
BAS 5 M is a professional barrier that allows rapid passage without waiting.
The body of the barrier is made of aluminum alloy protected by two coats of paint and has an IP65 protection class.
Its solid mechanical structure enables fast, high-speed and quiet operation.
Its high-performance technology is developed for intensive use of 5 million operating hours for intensive use up to 100% of the duty cycle.
Barrier 4-6 M without net
ACCESS CONTROLS FOR ALL SITUATIONS
You just have to contact us, Ip-Mirador takes care of the rest...
+33 (0)4 67 24 40 84